Home » Cylinder Honing Machine
Model No. : MI-550
The Cylinder Honing Machine from our unit is the award winning quality machine from the 1992 and 1999 NSIC techmart. Designed by experienced and skilled workforce, the machine is fabricated using 10 S W gauge sheet that gives a close dimensional accuracy and a perfect cross hatch pattern in the bores of engine cylinder body and sleeve.
The machine supports the easy interchange of conventional vitrified or abrasives with linear movement from end to end on linear bearings. Stroke speeds are variable and controllable. It is very easy to dial at any desired RPM and rate at any time while honing cradle of this machine can be indexed for precise alignment of inline and 60º or 90º V'S.
|Due to its free flowing Honing Head, it can be adjusted left-right / up-down in the cylinder, bore within seconds.||mm||68 to 140|
|Hone length capacity (power stroke)||mm||305|
|Honing speed (general)||Rpm||80 & 160|
|Honing speed (with inverter) step less||Rpm||0 to 160|
|Max. Cylinder block length||mm||1000|
|Electric motor (3 phase)||Hp||2|
|Air requirement at 100psi||Cfm||4|
|FLOOR Space lxbxh||mm||1651 * 1626 * 1600|
|Bearing plate swivel angle||Degree||± 45° to 90°|